DeWalt 780 Manuel d'instructions télécharger pdf (Page 6)

Optional Accessories (fig. 2–8)

The following accessories, designed for your saw, may be helpful. In some cases, other locally obtained work

supports, length stops, clamps, etc., may be more appropriate. Use care in selecting and using accessories.

II. DW7080 Extension work support

Used to support long overhanging workpieces, the work support is user assembled. Your saw table is

designed to accept two work supports; one on each side.

JJ. DW7051 Adjustable length stop:

Requires the use of one work support (see drawing). It is used to make repetitive cuts of the same length

from 0 to 107 cm (42").

KK. DW7082 Workpiece clamp: (similar model included)

Used for firmly clamping workpiece to the saw table for precision cutting.

LL. DW7084 Crown molding fence (Not available in Australia or New Zealand)

Used for precision cutting of crown molding.

MM. DW7053 Dustbag: (Included with some models)

Equipped with a zipper for easy emptying, the dust bag will capture the majority of the sawdust produced (not

shown).

NN. DW7023 / DW7033 Leg stand

The leg stand is used to exend the table width of the saw.

OO. DW7025 Clamp brackets

The clamp brackets are used for mounting the saw to a stand.

SAW BLADES: ALWAYS USE 305 mm (12") SAW BLADES WITH EITHER 1" (25.4 mm) OR 5/8" (15.88 mm)

ARBOR HOLES. SPEED RATING MUST BE AT LEAST 4800 RPM. Never use a smaller diameter blade. It will not be

guarded properly. Use crosscut blades only! Do not use blades designed for ripping, combination blades or blades

with hook angles in excess of 7°.

BLADE DESCRIPTIONS

APPLICATION DIAMETER TEETH

Construction Saw Blades (thin kerf with anti-stick rim)

General Purpose 305 mm (12") 40

Fine Crosscuts 305 mm (12") 60

Woodworking Saw Blades (provide smooth, clean cuts)

Fine crosscuts 305 mm (12") 80

Non-ferrous metals 305 mm (12") 96

NOTE: For cutting non-ferrous metals, use only saw blades with TCG (Triple

Chip Grind) teeth designed for this purpose.

Unpacking Your Saw

Check the contents of your miter saw carton to make sure that you have received all parts. In addition to this

instruction manual, the carton should contain:

1 DWS780 miter saw

1 DEWALT 305 mm (12") diameter saw blade

In bag:

1 Blade wrench

1 DW7053 dustbag

1 Material clamp

Specifications

CAPACITY OF CUT

50º miter left, 60º miter right,

49º bevel left and right

FIG. 2

FIG. 3

FIG. 4

FIG. 5

FIG. 6

FIG. 7

FIG. 8

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

DeWalt 780 Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Scies circulaires DeWalt 780