DeWalt DCH213 Manuel d'instructions

DCH213-XEHEAVY-DUTY 18V CORDLESS ROTARY HAMMERINSTRUCTION MANUAL

8To select forward rotation, release the trigger switch (B) and depress the forward/reverse control button on the right side of the tool. To select re

9Installing and Removing the Battery Pack (Fig. 4)WARNING: To reduce the risk of injury, never depress the battery release button without removing the

10a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry. For MASONRY, such as brick, cement, c

11LubricationYour power tool requires no additional lubrication.CleaningWARNING: Blow dirt and dust out of all air vents with clean, dry air at least

12

Stanley Black & Decker701 East Joppa Road, Baltimore, MD 21286 • 82 Taryn Drive, Epping, VIC 3076 Australia 1800 444 224 or (NZ) 0800 339 258(JU

1Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to

2c) Prevent unintentional starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch

3 • Replacement of the supply cord. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised DEWALT Service Centre in

4Important Safety Instructions for All Battery PacksWhen ordering replacement battery packs, be sure to include the catalog number and voltage. Consul

5the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Tran

6 • NEVER attempt to connect 2 chargers together. • The charger is designed to operate on standard 230 V household electrical power. Do not attempt to

7 3. A cold battery pack will charge at about half the rate of a warm battery pack. The battery pack will charge at that slower rate throughout the e