DeWalt DC820 Manuel d'instructions Page 1

DC820-XE, DC830-XE, DW059-XE13 mm (1/2") CORDLESS IMPACT WRENCHESDC825-XE, DC827-XE, DC835-XE, DC845-XE 6.35 mm (1/4") CORDLESS IMPACT DRIVE

8INTENDED USEThese heavy-duty impact wrench/drivers are designed for professional impact screwdriving applications. The impact function makes this to

9Forward/Reverse Control Button (Fig. 3) A forward/reverse control button (C) determines the direction of the tool and also serves as a lock off butto

10Anvil With Detent Pin (Fig. 5)DC820-XE, DC830-XE, DW059-XEPlace the switch in the locked off (center) position or remove battery pack before changin

11Recommended accessories for use with your tool are available at extra cost from your local service center. If you need any assistance in locating an

DEWALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, VIC 3138 Australia (03 8720 5100) • 5 Te Apunga Place, Mt Wellington, New Zealand (09 259

1IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US AT: 1800 654 155 (Aust) or 09 259 1111 (NZ).SAFETY INSTRUCTIONS FOR POWE

2b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearin

3 • Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision. Young children shou

4DANGER: Electrocution hazard. Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into c

5SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (LI-ION) • Do not incinerate the battery pack even if it is severely damaged or is completely worn out

6 • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater th

7 2. Insert the battery pack into the charger. The red (charging) light will blink continuously indicating that the charging process has started. 3