DeWalt D26411 Manuel d'instructions télécharger pdf (Page 8)

English

A. On/off switch E. Nozzle

B. Air vents F. Tool hanging ring

C. Kick-off stand G. Heat barrel cover

D. Air temperature adjustment knob

FIG.1

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of injury, turn unit off and

disconnect tool from power source before installing and removing

accessories, before making any adjustments or removing/installing

attachments or accessories.

Setting the Air Temperature (Fig. 1)

The air temperature can be adjusted to suit a wide range

of applications. Turn the air temperature adjustment knob (D)

clockwise or counterclockwise for higher or lower heat. The table

below suggests settings for different applications.

Setting Applications

Low • Drying paint and varnish

• Removing stickers

• Waxing and dewaxing

• Drying wet timber prior to filling

• Shrinking PVC wrapping and insulation tubes

• Thawing frozen pipes

Medium • Welding plastics

• Bending plastic pipes and sheets

• Loosening rusted or tightly fastened

nuts and bolts

High • Removing paint and lacquer

• Soldering plumbing joints

ATTACH THE CORRECT ACCESSORY

This tool is supplied with a set of accessories for different

applications.

Icon Description Purpose

Cone nozzle Welding, shrink sleeving

(heat concentrated over

small area)

50 mm Fish tail Drying, thawing

surface nozzle (heat spread

over wide area)

1. Make sure the on/off switch (A) is in position "O" and the tool

is disconnected from the power source. Ensure the nozzle has

cooled down.

2. Place the desired accessory onto the nozzle.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

DeWalt D26411 Manuel d'instructions Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques DeWalt D26411