DeWalt D55275 Manuel d'instructions télécharger pdf (Page 7)

compressor during or immediately after operation. Compressor will

remain hot for several minutes after operation. Do not move the

compressor while it is running. Hot motor parts could cause burns

contributing to the dropping of the compressor, damaging the

compressor and/or injuring the operator.

RISK FROM NOISE

CAUTION: Wear appropriate personal hearing protection during

use. Under some conditions and duration of use, noise from

this product may contribute to hearing loss.

ENGINE

Your air compressor is powered by a Honda

gasoline

engine. Most accidents with engines can be prevented if

you follow all instructions in this manual, the engine owner’s

manual and on the engine. Some of the most common hazards are

discussed herein, along with the best way to protect yourself and

others:

• Know how to stop the engine quickly, and understand

the operation of all controls.

• Never permit anyone to operate the engine without proper

instructions.

• Do not allow children to operate the engine.

• Keep children and pets away from the area of operation.

Refuel with care: ALLOW ENGINE TO COOL. Gasoline is extremely

flammable, and gasoline vapor can explode. Refuel outdoors, in a well-

ventilated area, with the engine off. Never smoke near gasoline, and

keep other flames and sparks away. Always store gasoline in an

approved container. If any fuel is spilled, move compressor to another

location before starting the engine.

Carbon Monoxide Hazards: Exhaust gas contains poisonous carbon

monoxide. Avoid inhalation of exhaust gas. Never run the engine in a

closed garage or confined area.

ALWAYS STORE COMPRESSOR IN A HORIZONTAL POSITION,

ON ALL FOUR RUBBER MOUNTS.

English

Introduction

Congratulations on the purchase of your new DEWALT Air Com-

pressor! You can be assured that this tool has been constructed with

the highest level of precision and accuracy. Each component has been

rigorously tested to ensure the quality, endurance and performance of

this air compressor.

By reading and following the safety, operation, maintenance and

troubleshooting steps described in this manual, you will receive years

of trouble free operation.

The manufacturer reserves the right to make changes in price, color,

materials, equipment specifications or models at any time without

notice.

Inspection of Compressor

Inspect for signs of obvious or concealed freight damage. Report any

damage to the delivering freight carrier immediately. Be sure that all

damaged parts are replaced and any mechanical problems are

corrected prior to the operation of the air compressor. The air

compressor serial number is located on the deck of the air compressor

and pump bearing cap. Please write the serial number in the space

provided in the service section for future reference.

Features

PILOT VALVE

Pilot valves are used to maintain a

constant pressure range while running

continuously. The pilot valve may be

used to operate a discharge line

unloader or an unloading device in the

compressor head. The D

EWALT compressor unloads through the com-

pressor head. Unloading occurs when the receivers (tanks) reach a

preset cut-out pressure. The pilot valve opens, actuating the unloading

device that allows the compressor to run in an unloaded mode. When

the tank pressure drops to the preset cut-in pressure, the pilot valve

closes allowing the unloading device to close and the compressor once

again pumps into the tanks.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Commentaires sur ces manuels

Pas de commentaire

DeWalt D55275 Manuel d'instructions Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Compresseurs d'air DeWalt D55275